LED Work Lamp
WN12C 4-LED Compact Square Work Light for Machinery
WN12C compact square LED work light for tight machinery spaces and utility vehicles. Four visible optical modules support an estimated 12W and about 840 effective lumens. Adjustable bracket aids fitment. Electrical, beam and environmental specifications require sample confirmation.
Specifications
- Model
- WN12C
- Visible LED Modules
- 4
- Estimated Power
- Approx. 12W (4 modules × 3W estimate)
- Estimated Effective Lumen
- Approx. 840 lm effective (engineering estimate)
- Target Input Voltage
- 10–32V DC target (confirm on sample)
- Mounting
- Adjustable U-bracket
- Validation Status
- Power/lumen/voltage are engineering estimates; sample testing required
WN12C Compact Square LED Work Light for Tight Machinery Spaces
The WN12C is the smallest-output design in this new work-light group. It has a compact square face, four visible optical LED modules and an adjustable U-bracket. It is intended for applications where available space and electrical load may matter more than maximum brightness.
Commercial value of a smaller lamp
Purchasing teams sometimes over-specify wattage and then discover that the lamp is difficult to mount, draws unnecessary power or creates reflections close to the operator. A compact 12W-class design gives OEM engineers, distributors and upfitters another option for localized illumination. Its adjustable bracket supports position trials before a final installation angle is fixed, which can reduce drilling changes and field complaints.
How the estimates were calculated
Four optical modules are visible in the supplied product image. At approximately 3W per module, estimated nominal power is 12W. Using about 70 effective lumens per watt as a conservative engineering assumption, estimated output is approximately 840 lumens. These numbers are provisional and should not be treated as certified data. Confirm actual voltage range, current draw, thermal behavior, lumen output and beam distribution on samples.
Possible applications
The WN12C may be evaluated on compact machinery, utility vehicles, service compartments, agricultural implements, small loaders and auxiliary work zones. Suitability depends on installation distance, desired beam, ambient light, operator line of sight and environmental exposure.
Low-risk procurement process
Before volume purchase, verify dimensions, bracket material and fastener, wiring or connector, target voltage, beam type, required ingress and vibration tests, EMC needs, operating-temperature requirement, packaging and private-label artwork. Ask the supplier to retain a signed golden sample and define which specifications require notice before any component change. These steps are often more important for warranty control than an unverified marketing lumen number.
The WN12C is a practical candidate when a compact work light is needed and the buyer is prepared to validate the application. Provide a mounting-space drawing and intended working distance so an appropriate sample can be evaluated.
