LED Work Lamp
WN30O 10-LED Oval Work Light for Trucks and Utility Vehicles
WN30O oval LED work light for trucks, fleet service vehicles and utility equipment. Ten visible optical modules support an estimated 30W and about 2,100 effective lumens. Adjustable bracket helps aiming. Confirm voltage, beam, photometrics and compliance before volume purchase.
Specifications
- Model
- WN30O
- Visible LED Modules
- 10
- Estimated Power
- Approx. 30W (10 modules × 3W estimate)
- Estimated Effective Lumen
- Approx. 2,100 lm effective (engineering estimate)
- Target Input Voltage
- 10–32V DC target (confirm on sample)
- Mounting
- Adjustable U-bracket
- Validation Status
- Power/lumen/voltage are engineering estimates; sample testing required
WN30O Oval LED Work Light for Trucks and Utility Vehicles
The WN30O combines an oval housing, ten visible optical LED modules and an adjustable U-bracket. It is designed for evaluation on trucks, fleet service vehicles and utility equipment that need a medium-output auxiliary work light.
Why fleet and distributor buyers may consider it
Fleet operators and distributors usually care about repeatability, installation time and warranty exposure as much as initial brightness. The oval format can provide an alternative when a square lamp does not match the available space or desired vehicle appearance. The adjustable bracket allows aiming during installation, which can help place light on the work area rather than into mirrors, nearby traffic or the operator’s eyes.
Estimated electrical and optical figures
Ten optical modules are visible. Based on the project assumption of approximately 3W per module, nominal power is estimated at 30W. At a conservative planning value of about 70 effective lumens per watt, output is estimated at around 2,100 lumens. These figures are engineering estimates only. Production samples should be tested for input voltage, current draw, actual lumen output, beam distribution and heat management.
Potential applications
The WN30O may be evaluated as an auxiliary work light on service trucks, utility vehicles, trailers, agricultural machines, loaders and fleet maintenance equipment. If it is considered for reversing or road-adjacent use, the buyer must confirm the required approval, mounting rule and beam performance for the destination market.
Questions to close before ordering
Confirm the installation envelope, bracket and fastener, wiring or connector, voltage range, beam pattern, ingress and vibration test requirements, EMC documents, operating temperature, label, packaging and warranty terms. Request a golden sample and pilot batch. Fleet buyers should test the lamp on a representative vehicle at the normal working distance; distributors should define which applications they will and will not advertise.
The WN30O offers a new oval work-light option for B2B sampling. Send the intended vehicle, mounting location, target voltage and compliance market so the specification can be validated before quotation.
