LED rear lamps
R-410C Magnetic LED Trailer Rear Lamp Kit | 7-Pin Plug, IP65
R-410C quick-fit magnetic LED trailer rear lamp kit with 7-pin plug. Five magnets per lamp, 7.5 m plug-to-lamp cable, 2.5 m between lamps, 12–30V DC, IP65 and tail, indicator, stop-brake and license plate functions.
Specifications
- Model
- R-410C
- Version
- Most complete quick-fit set
- Kit
- Pair of magnetic LED rear lamps
- Input Voltage
- 12–30V DC
- Functions
- Tail / indicator / stop-brake / license plate
- Connection
- 7-pin plug
- Plug-to-Lamp Cable
- 7.5 m
- Cable Between Lamps
- 2.5 m
- Magnetic Base
- 5 magnets per lamp
- Mounting
- Magnetic quick-fit
- Ingress Protection
- IP65
- Typical Applications
- Temporary towing / rental / recovery / farm trailer
R-410C Magnetic Quick-Fit LED Trailer Rear Lamp Kit
R-410C is the most complete quick-install version in the R-410 family. It combines two multi-function rear lamps, a long 7-pin wiring harness and built-in magnetic bases for temporary towing and short-term trailer use.
Five Magnets per Lamp
Each lamp uses five built-in magnets for attachment to a suitable steel surface. The magnetic design removes the need to drill mounting holes and allows the kit to be moved between trailers or vehicles.
For rental fleets, recovery operators and agricultural users, this saves installation time and helps one lighting kit support several assets. The mounting surface must still be clean, flat and ferrous. Aluminum or composite panels will not provide the same attachment.
Complete 7-Pin Harness
The cable length from plug to lamp is 7.5 m, with 2.5 m between the lamps. A complete harness reduces the need for field wiring and can shorten setup time during temporary towing.
Buyers should confirm that the 7-pin plug standard matches the towing vehicle. Cable routing also needs to prevent dragging, pinching or contact with moving parts.
Four Rear-Lighting Functions
The set provides tail, direction-indicator, stop-brake and license-plate light functions. This allows a temporary kit to cover the main rear-signaling requirements shown in the brochure.
Lamp orientation and license-plate illumination should be checked on the actual trailer. Magnetic convenience does not remove the need for correct positioning.
12–30V DC and IP65
The kit operates from 12–30V DC and is rated to IP65. It supports common 12V and 24V towing systems and offers protection against dust and water jets during normal use.
B2B Buyer Applications
R-410C is relevant to towing-equipment distributors, trailer rental fleets, recovery companies, agricultural machinery dealers and service workshops. Its business value comes from rapid deployment and reusability, reducing installation labor and the need to permanently equip every occasional-use trailer.
Before ordering, verify magnet retention on the target surface, 7-pin compatibility, cable lengths, packing contents and local road requirements. The brochure does not list approval numbers, so buyers should request compliance documents before making road-legal claims.
R-410C should be selected when quick fitment and transferability create more value than permanent screw mounting.
